TY - JOUR
T1 - Establishment of recombinant major allergens Bet v 1 and Phl p 5a as Ph. Eur. reference standards and validation of ELISA methods for their measurement. Results from feasibility studies
AU - Vieths, S.
AU - Barber, D.
AU - Chapman, M.
AU - Costanzo, A.
AU - Daas, A.
AU - Fiebig, H.
AU - Hanschmann, K. M.
AU - Hrabina, M.
AU - Kaul, S.
AU - Ledesma, A.
AU - Moingeon, P.
AU - Reese, G.
AU - Schörner, C.
AU - van Ree, R.
AU - Weber, B.
AU - Buchheit, K. H.
PY - 2012
Y1 - 2012
N2 - The potency of allergen extracts is determined as total allergenic activity without consideration of their composition and the units differ from one manufacturer to another, making it very difficult to compare the different products. Recently, purified major allergens have been obtained by recombinant DNA technology and produced under Good Manufacturing Practice (GMP) conditions. In principle, such recombinant allergens could be established as reference standards and could help for the standardisation of the major allergen content of allergen extracts. Two recombinant major allergens, one from birch pollen, rBet v 1, and one from Timothy grass pollen, Phl p 5a, have been selected at the end of the CREATE programme as a potential starting point for the establishment as European Pharmacopoeia (Ph. Eur.) Reference Standards through a project run by the Biological Standardisation Programme (BSP) of the European Directorate for the Quality of Medicines & HealthCare (EDQM). To this end, bulk candidate recombinant materials, produced under GMP conditions, were procured from two European manufacturers and subsequently formulated and lyophilised. Four ELISA systems from three different manufacturers were included in the project, two for Bet v 1 and two for Phl p 5a with the aim of establishing reference methods for determination of the respective major antigens both in natural allergen extracts as well as in recombinant allergen products. The project was run in 3 phases: a preparatory and preliminary testing phase (feasibility phase or Phase 1), an extended feasibility phase carried out in 3 laboratories (Phase 2) to confirm the transferability of the methods and an international collaborative study with a large number of participating laboratories (Phase 3). This article describes the work done in Phase 1 and Phase 2, i.e. the physico-chemical and biological characterisation of the recombinant candidate reference standards, the assessment of their suitability for the intended purpose as well as the evaluation of the candidate ELISA systems. The results show that both candidate reference standards are suitable for the intended purpose. In addition, three out of the four ELISA systems that were included in the preliminary phase were found to be appropriate for further evaluation in the collaborative study which was organised in 2011. The results of the collaborative study will be published separately
AB - The potency of allergen extracts is determined as total allergenic activity without consideration of their composition and the units differ from one manufacturer to another, making it very difficult to compare the different products. Recently, purified major allergens have been obtained by recombinant DNA technology and produced under Good Manufacturing Practice (GMP) conditions. In principle, such recombinant allergens could be established as reference standards and could help for the standardisation of the major allergen content of allergen extracts. Two recombinant major allergens, one from birch pollen, rBet v 1, and one from Timothy grass pollen, Phl p 5a, have been selected at the end of the CREATE programme as a potential starting point for the establishment as European Pharmacopoeia (Ph. Eur.) Reference Standards through a project run by the Biological Standardisation Programme (BSP) of the European Directorate for the Quality of Medicines & HealthCare (EDQM). To this end, bulk candidate recombinant materials, produced under GMP conditions, were procured from two European manufacturers and subsequently formulated and lyophilised. Four ELISA systems from three different manufacturers were included in the project, two for Bet v 1 and two for Phl p 5a with the aim of establishing reference methods for determination of the respective major antigens both in natural allergen extracts as well as in recombinant allergen products. The project was run in 3 phases: a preparatory and preliminary testing phase (feasibility phase or Phase 1), an extended feasibility phase carried out in 3 laboratories (Phase 2) to confirm the transferability of the methods and an international collaborative study with a large number of participating laboratories (Phase 3). This article describes the work done in Phase 1 and Phase 2, i.e. the physico-chemical and biological characterisation of the recombinant candidate reference standards, the assessment of their suitability for the intended purpose as well as the evaluation of the candidate ELISA systems. The results show that both candidate reference standards are suitable for the intended purpose. In addition, three out of the four ELISA systems that were included in the preliminary phase were found to be appropriate for further evaluation in the collaborative study which was organised in 2011. The results of the collaborative study will be published separately
M3 - Article
C2 - 23327896
SN - 2075-2164
VL - 2012
SP - 118
EP - 134
JO - Pharmeuropa bio & scientific notes
JF - Pharmeuropa bio & scientific notes
ER -